Things you may want to know

02 Dec
20 Comment(s)
77672 View(s)
Hardwood flooring is a beautiful and unique product of nature, which is characterized by distinctive variations in grain and colors. These natural variations in color and grain are not flaws but are a part of the natural beauty and uniqueness of hardwood flooring. These inherent variations should be expected and serve to enhance the natural beauty and enduring charm. Our floorings are manufactured in accordance with accepted industry standards, which permit a defect tolerance not to exceed 5%. The defects may be of a manufacturing or natural type.
Before we head to the installation... Things you need to know...
Job site Inspection& Acclimation
- This type of real wood flooring
can be installed below, equal or above
ground level. Do not install
in a bathroom.
- In a new construction, hardwood flooring should be one of the last items installed. All work involving water or moisture (plumbing, acoustical ceilings, dry wall taping, etc.) should be completed prior to wood flooring being installed. Heating and air systems should be fully operating maintaining a consistent room temperature at 16°C to 27°C (60-80° F) and a constant relative humidity of 40% to 55%.
- Flooring
should not be delivered until the building has been closed in and cement work,
plastering, painting and other materials are completely dry. Concrete and plaster should be cured
and at least 60 days old.
Check basements and under-floor crawl space to be sure that they are dry and
well ventilated to avoid damage caused by moisture.
- Handle
with care. Do not stand on ends. Store our flooring in a dry place being sure to provide
at least a four-inch air space under and around cartons.
- Do not store
directly on concrete or near outside
walls. Cartons should
be placed in the installation
area.
- The humidity level of the house must be maintained between 40 % and 55 % all year long. Wood is a living product which reacts to humidity level variations. During summer, where the humidity level is at its highest point, the wood has a natural expansion and absorbs the humidity, these variations must be dealt with adequate dehumidification. As for winter, when the heating system is working, the humidity level is lower. It is then recommended to use a humidifier to minimise the extreme effects of shrinkage.
Subfloor conditions
- Clean- Scraped or sanded, swept, free of wax, grease, paint, oil and other debris.
- Horizontal/ Flat- Maximum tolerance of 5mm over 3m(3/16'' over 10') or 3mm over 2m(1/8'' over6')
- Sand high areas or joints.
If the floor is glued,
fill the fill low areas with a latex additive
cement surfacing product with a minimum resistance to compression of 20
000 kPa.
- Concrete
Slabs (regardless of existing floor covering): Use an approved calibrated
concrete Moisture Meter as a preliminary measurement for moisture. Concrete
subfloors must be finished at least 30 days before performing a test. Acceptable verification methods: Perform a polyfilm
test. Tape down 2’ x 2’ polyfilm
squares (a clear garbage bag or plastic drop cloth will do) in several places
on the floor. Wait 24-48 hours, and then check for the appearance of condensation
on the inside of the bag or plastic for a darkening on the concrete subfloor.
Either occurrence signals the likely presence of excess moisture, which needs
other measures with the concrete moisture meter Tramex. The measure must not
climb over 4,5 on the superior graduation. The floor can be glued directly on
concrete with a compression resistance of at least 20 000 kPa (3 000 lb/in2).
- Wood Substrates: Test the moisture of the wood substrate using a calibrated moisture meter approved for testing wood moisture according to the meter manufacturer. The reading should not exceed 12%, or read more than a 4% difference than moisture content of products being installed.
Radiant Subfloor heating
NOTE: Always
make sure that the selected
product is recommended for this type of installation. Some species are not compatible and cannot be installed on this
type of subfloor; Jatoba, Maple, Kempas, Ironwood, Ipé, Asian Mahogany are some
species that are not suitable for Radiant heating. Please ensure that the
species you have chosen is suitable.
- The heating system must be functional and working for at least 7 days prior to the floor installation.
- Stop the heating and let the floor cool down to ambient temperature for 3 or 4 hours before
starting the floor installation.
- Immediately start the radiant
heating system after the installation. The temperature of the finished surface cannot go over 27 °C (80
°F) at all times for the duration of the flooring’s life span.
- Radiant
heating systems usually procure a dry heat which can lower the ambient humidity
level. It could be necessary to use a humidifier to maintain a recommended level
of 40 % to 55 % and prevent
any damage to the floor.
- Flooring
installed on a radiant heating system must be glued at each end, in order to
reduce the shrinkage in length.
Apply a layer of recommended wood glue on the grooved
side before inserting the strip.
- The heating system must be functional and working for at least 7 days prior to the floor installation.
- Stop the heating and let the floor cool down to ambient temperature for 3 or 4 hours before
starting the floor installation.
1382 Comment(s)
Uniccshop is a fresh trusted valid cc shop. Get real live cc from our unicc shop bazar cc shop. uni cc shop credit cards are 100% valid.
We’re a group of volunteers and starting a new scheme in our community. Your website offered us with valuable info to work on. You’ve done a formidable job and our whole community will be thankful to you.
Welcome to uni cc ru most trusted cc shop. unicc ru provide high credit cc / cvv / dumps. unicc ru cc is 100% working. unicc.ru shop always provides the best quality cc.
Unicvv is a fresh trusted valid cc / cvv / dumps shop. Get real live cc / cvv / dumps from our unicvv ru cc shop. unicvv cc shop credit cards are 100% valid.
Welcome to Briansclub, your trusted source for top-quality products. All products on Briansclub cm are sourced from Legendary Brian Krebs. Briansclub.cm always provides good quality products.
Briansclub provide best quality cc from the Legendary Brian Krebs at Briansclub cm cc shop. Briansclub CC / CVV2 and Dumps is 100% working.
Vclubshop is the most trusted cc / cvv/ dumps shop in the world. Vclubshop gd provides high credit cc for carding. Vclubshop gd cc is 100% working.
Carder007 is the trusted valid CC / CVV / Dumps shop. You can get live cc from carder007. Carder007 always provides high credit cc for carding.
Briansclub best quality cards from the Legendary Brian Krebs at Briansclub cm. Briansclub CC / CVV2 and Dumps is 100% working.
Fe shop provide high balance cc. Fe cc shop is the most trusted cc shop. Fe shop give cc for carding since 2012.
vclub Welcome to vclub cc, your premier destination for all things related to vclub and vclub cc shop. At vclub cc shop, we pride ourselves on our extensive range of items.
Bigfat cc is a valid cc shop. Our bigfat.cc is 100% working. You can use Bigfat cc for any kind of online payment. Bigfat cc provides high credit cc.
"Software & IT Solutions! Boost Traffic, Leads, and Sales Effectively. Expert seo services: roi-driven strategies for organic success. Guaranteed results with organic SEO strategies. Our seo company executes unique strategic plans to achieve your business goals. Contact Now Satisfaction Guaranteed To get your complete satisfaction, we provide you proven results to get connected on a"
I definitely enjoying every little bit of it. It is a great website and nice share. I want to thank you. Good job! You guys do a great blog, and have some great contents. Keep up the good work.
I’m not sure exactly how I discovered your blog because I had been researching information on Real Estate in Lake Mary, FL, but anyway, I have had a pleasant time reading it, keep it up!
TWEEZER WORLD extensive range of precision tweezers, including eyelash, eyebrow, Forceps, Eyes, Kitchen and jewelry tweezers. Perfect for all use!
Your blog provided us with valuable information to work with. Each & every tips of your post are awesome. Thanks a lot for sharing. Keep blogging..
I feel this is among the most important details for me. And i am glad looking at your report. But want to remark on some general things, The web site style is excellent, the articles or blog posts is truly great : D. Very good work, cheers
Gambling is an activity where players risk money on games and bets in the hope of winning more. Whether in casinos or online, it’s an exciting experience, but responsible gaming is key to avoiding losses.
You made such an interesting piece to read, giving every subject enlightenment for us to gain knowledge. Thanks for sharing the such information with us to read this...
Leave a Comment